To Next Page

To Previous Page

General Operation

When you rst connect the unit to the mains socket, the unit will be in Standby. The

POWER indicator will light up red.

• Press /SOURCE on the unit or on the remote control to switch the unit on. The

status indicator of the last used mode will light up.

• Press and hold /SOURCE on the unit or press on the remote control to switch the

unit back to Standby. The POWER indicator will light up red.

• Disconnect the mains plug from the mains socket if you want to switch the unit o

completely.

When the unit volume is close to mute or is idle for approximately 15 minutes,

it will automatically switch to Standby.

Selecting Modes

Press /SOURCE on the unit or SOURCE on the remote control repeatedly to switch

between AUX, MP3 LINK and OPTICAL modes.

Adjusting the Volume

• Press VOL +/– to adjust the volume.

• If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again

or press VOL + to resume normal listening.

• While adjusting the volume, the status indicator ashes quickly.

• While the volume level reaches its maximum level, if you press the VOL + Button again,

the status indicator ashes once. While the volume level reaches its minimum level, if

you press the VOL – Button again, the status indicator ashes once.

If the unit is connected with an external device, you may also adjust the

volume of the input source for volume control.

Selecting the Equaliser

While playing, press EQ on the remote control to select between preset equalisers: Movie

(recommended for viewing movies), Music (recommended for listening to music) and

default setting (EQ mode o).

• When Movie EQ is selected, the MOVIE/MUSIC Indicator will light up steadily.

• When Music EQ is selected, the MOVIE/MUSIC Indicator will ash.

• When EQ mode is o, the MOVIE/MUSIC Indicator will turn o.

• While using the OPTICAL or AUX connection, Movie EQ will be

automatically selected.

• While using the MP3 LINK connection, Music EQ will be automatically

selected.

L32S14_IB_140828_will.indd 13 28/8/14 2:37 PM

Logik L32SWLB14 User Manual

Other manuals for Logik L32SWLB14