24
GB
Using the Features
3. Press the BACK button to return to the previous menu.
4. Press the EXIT button to exit the menu.
2. Press the
buttons to select Signal Information and then press the
OK button to view the signal information.
Signal Information (DTV Mode)
Allows you to view the signal information.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
This feature is not available in all countries.
To insert the Common Access Module
1. Before you insert the Common Access Module, ensure that the TV is
switched off and the viewing card is inserted in accordance with the
Service Provider’s instructions.
2. Insert the Common Access Module into the slot. Flip the Common Access
Module to another side and try again if you feel resistance.
3. Switch the TV on.
To remove the Common Access Module
1. Before you remove the Common Access Module, ensure that the TV is
switched off.
2. Pull the Common Access Module from the slot.
3. Switch the TV on.
CI (Common Interface) (DTV Mode)
The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These
services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the
service provider.
HDM I1
HDM I3
HDM I2
POW ER
ON/ OFF
AC
Rear View of TV
CI (Common Interface)
Allows the Common Access Module to be inserted
and access the content that has been encrypted.
Common Access
Module
Do not repeatedly insert or remove
the Common Access Module as this
may damage the interface and cause a
malfunction.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Auto Tuning
DTV Manual Tuning
Signal Information
CI Information
Software Update(OAD) Off
Software Update(USB)
Channel Edit
Signal Information
Channel 50
Frequency 706.00Mhz
Quality 99
Strength 91
Network Crystal Palace
To Next Page
Loading...
Need help?
General
