26
GB
Using the Features
7. When the download is complete software update menu will appear, the TV
will automatically upgrade the software. Do not switch off the TV during the
software update.
8. When the update is complete, the TV will return to standby mode.
9. Press the
/ I button at the front right side of the TV or the button on the
remote control to switch on the TV.
6. If you select Yes, the over air download will start. Press the EXIT button if
you want to stop the download and exit the menu.
5. During normal DTV viewing, if the TV detects the latest firmware from the
DTV signal, the Over Air Download screen will appear. Press the
buttons
to select Yes / No for upgrade procedure.
During the download, please do not turn off or unplug your TV.
Yes
No
New Fireware is available
TV Version V0.01
Stream Version v0.02
Yes to upgrade
No to exit the upgrade
EXIT
Download
20%
Software Update(OAD)
66%
If you experience difficulties after the software update, we recommend
that you restore your TV to the factory default settings. To do this, follow
the steps below:
1. Press the MENU button to go to the MAIN menu. Press the
buttons
to select OPTION and then press the OK button.
2. Press the
buttons to select Restore Factory Default and then press
the OK button. Press the
button to select Yes to reset the setting.
3. The TV will restore all settings and go to the First Time Installation.
Follow the First Time Installation steps (refer to page 18-19 for details).
Software Update (USB)
This function is only for servicing purposes. Any update information for this TV (if any) will be available at the following website:
http://knowhow.com/ or call our Customer Technical Services Centre. Tel: 0844 800 6020 (UK only)
Customising the Picture Setting
Allows you to set your preferred picture mode.
1. Press the MENU button and then press the
buttons to select the
PICTURE menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
To Next Page
Loading...
Need help?
General
