13
Automatic Alarm Repeat
The alarm will automatically repeat at the selected time as long as the alarm icon is displayed.
1. To cancel this function, press ALARM and turn SNOOZE/SCROLL/SELECT to select Alarm 1
or Alarm 2, then press to confirm.
2. Turn SNOOZE/SCROLL/SELECT to select the options, then press to confirm.
Enable Off Save
1
or
2
icon will disappear from the display.
Snooze Function
• When the alarm sounds, press SNOOZE/SCROLL/SELECT to temporarily switch off the
alarm. The alarm switch off time will vary according to the selected alarm duration. Press
SNOOZE/SCROLL/SELECT repeatedly to select the alarm switch off time.
Alarm Duration Alarm Switch Off Time
15 minutes 5 or 10 minutes
30 minutes 5, 10 or 15 minutes
45 / 60 /90 minutes 5, 10, 15 or 30 minutes
• Turn off the alarm by pressing .
Sleep Function
This function allows you to programme the unit to switch to standby mode by itself after a set
sleep time.
1. To activate the sleep function, ensure the unit is ON (not in STANDBY mode) then press
MENU.
2. Turn SNOOZE/SCROLL/SELECT to select the options, then press to confirm.
Main menu Sleep
3. When the “Set Sleep Time” shows on the display, turn SNOOZE/SCROLL/SELECT to select
your desired sleep time.
15 30 45 60
Sleep Off
4. Press SNOOZE/SCROLL/SELECT to confirm. “ ” will show on the display.
5. When the sleep timer counts down to zero, the unit will switch to standby mode. To turn
the sleep function off while the sleep timer is still counting down, press . “ ” will disappear
from the display.
L5DAB13E_IB_130204_Michelle.indb 13 4/2/13 2:32 PM
To Next Page
Loading...
Need help?
General
