EasyManuals Logo
Home>Logik>Radio>L66DAB11

Logik L66DAB11 User Manual

Logik L66DAB11
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
Ensure to unplug the unit from the mains socket before cleaning.
Maintenance
To clean the unit, wipe the case with a slightly moist, lint-free cloth.
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
Do not spray an aerosol at or near the unit.
Hints and Tips
Problem Solution
No Sound Adjust the volume control, it may not be turned up.
Static Sound Signal reception too low. Adjust the aerial or move the unit to a
stronger signal location.
Sound is distorted Volume is too high. Adjust the volume control.
Desired station not
found
Weak signal. Use the Manual Tune function.
The LCD display shows
“SERVICE N/A
No DAB coverage in your area or poor reception. Adjust the position
of the aerial.
Poor reception. Adjust the position of the aerial.
The LCD display is blank This may occur if the broadcaster changes the label of a service or
removes a label while tuned. The unit will try to retune or perform
a scan.
Specication
Mains Supply AC 100 – 240V~ 50/60Hz
DC 6V 1.5V(UM2) x 4
Output Power 2.0W x 2
Radio Frequency Range DAB 174 – 240 MHz
FM 87.5 – 108 MHz
Dimension 250 (L) x 115 (W) x 192.5 (H) mm
Weight 1.57kg
Features and specifications are subject to change without prior notice.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L66DAB11 and is the answer not in the manual?

Logik L66DAB11 Specifications

General IconGeneral
BrandLogik
ModelL66DAB11
CategoryRadio
LanguageEnglish

Related product manuals