12
Setting the Clock
When you first connect the unit to the mains socket, the unit will be
in STANDBY mode. The clock is displayed in 12 hour format and the
display will show “12 : 00” when the unit is powered on.
1. To set the clock, press and hold the TIME button.
2. While still holding the TIME button, use the HOUR and MIN
buttons to adjust the time. Press the TIME and HOUR buttons to
adjust the time one step at a time, or press and hold to scroll more
quickly
3. Once adjusted, release the TIME button to set the time.
Setting the Alarm
1. To set the alarm time, press and hold the
ALARM button.
2. While still holding the ALARM button, press
the TIME and HOUR buttons to adjust the
time one step at a time or hold to scroll more
quickly.
3. Once adjusted release the ALARM button to
set the time of the alarm.
4. For a buzzer alarm, turn the BUZZ/MUTE/
VOL control wheel to the BUZZ position, it
will click. For a radio alarm tune the desired
station (see radio reception on the next page)
and set the desired volume with the BUZZ/
MUTE/VOL control.
5. To turn the alarm on, adjust the ALARM/
RADIO OFF/RADIO ON switch to the ALARM
position. The ALARM light on the front panel
will be lit to show the alarm is set. The alarm
will now sound at the set time.
6. To cancel the alarm adjust the ALARM/RADIO
OFF/RADIO ON switch to the RADIO OFF
position.
After setting the alarm, you can press and hold the
ALARM button to view the alarm time.
VOL
MUTE
LCRAN12_IB_Final200318V9.indd 12 19/03/2020 15:50
To Next Page
Loading...
Need help?
General
