INSTALLATION
6
3. Do not connect the unit to the mains socket
before installation. Ensure you are not
installing the unit right in front of the mains
socket. This is to avoid potential damage to
the back of the unit.
Leave some space
Stick the Condensation
Strip under the worktop,
where you want to install
the dishwasher.
4. The condensation strip must be tted
to the underside of the worktop above
your dishwasher to protect it against any
moisture. Its purpose is to protect your
worktop’s underside from steam rising from
the dishwasher.
Remove the backing paper from the
condensation strip.
5. Stick the condensation strip to the
underside of the worktop.
Ensure the surface is clean prior to
sticking the condensation strip to the
underside of the worktop.
Failure to attach the condensation
strip could result in damage to the
underside of your worktop!
LID45W20_IB_Final200727.indd 6LID45W20_IB_Final200727.indd 6 27/7/2020 4:23 PM27/7/2020 4:23 PM
To Next Page
Loading...
Need help?
General
