INSTALLATION
11
U-shaped drain
hose holder
Water drain hose
20. Connect the drain hose. The drain hose can
be placed into your sink, or connected to
the waste pipe.
21. After connecting the hoses, check all
connections for leaks.
Before connecting to the waste pipe,
make sure to check the waste pipe
and remove any stopper or blockage
inside, otherwise the unit may not be
able to expel the waste water properly.
• The waste pipe must only be
connected to the foul drains and
not the surface water drainage
system.
• Make sure you do not raise the
drain hose above 10cm from
the outlet on the dishwasher.
Your dishwasher will not drain
properly if you raise the hose by
more than 10cm.
• Do not forcefully bend the drain
hose.
• You may use the u-shaped drain
hose holder to secure your drain
hose and to avoid bending it.
• Please close the hydrant after use.
LID45W20_IB_Final200727.indd 11LID45W20_IB_Final200727.indd 11 27/7/2020 4:23 PM27/7/2020 4:23 PM
To Next Page
Loading...
Need help?
General
