23
The Harmony one is always learning new tricks!
Maintaining your Harmony 610
Your Harmony 610 contains internal software, called firmware. The remote’s firmware is similar to
your computer’s operating system.
Logitech updates the firmware for your remote to ensure you’re always getting the most from
your Harmony 610. Generally, when you connect your remote to your computer the Harmony
Remote Software updates your remote automatically if new firmware is available.
However, sometimes you may need to update the firmware manually.
To upgrade your Harmony 610 firmware:
Connect your Harmony to your computer using the USB cable.1.
Start the Harmony Remote Software.2.
Click 3. Downloads.
Click 4. Firmware.
Follow the online instructions.5.
Upgrading your Harmony 610 firmware
After you finish making any changes to your Harmony 610 configuration, you should test the
new set up to ensure everything is working the way you expect. This testing process is the same
as the one you did when you set up your Harmony 610 for the first time. For more detailed
information, see Testing your setup.
Testing your remote settings after a software upgrade
When you upgrade to a newer model Harmony, you can transfer the configuration from your
old remote to your new remote.
To upgrade to a new model Harmony remote:
From the Harmony Remote Software:
Click 1. Remote Settings.
Click 2. Manage Remotes.
Click 3. Replace.
Follow the online instructions.4.
Upgrading to a new Harmony remote
To Next Page
Loading...
Need help?
General
Weight and Dimensions
