3
LOGITECH HARMONY LINK USER MANUAL
5. Collect your model numbers
6. Add devices
7. Add activities
8. Sync with your Harmony Link app
1. Connecting your Harmony Link
Before you can begin setting up your Harmony Link, you need to plug it into a power
supply using the supplied AC adaptor, and connect it to your computer using the
supplied USB cable.
2. Launching My Harmony
Open a browser on your computer and go to MyHarmony.com. From there, follow the
online instructions to set up your Harmony Link. If you are setting up Harmony Link for the
fi rst time, you’ll be asked to create a Harmony account.
3. Choosing a room
As part of the setup, you are asked to pick the room where your Harmony Link will be
located. Associating your Harmony Link with a room helps you distinguish it from other
devices when connecting to it from your Harmony Link app.
4. Connecting to your wireless network
Next, you will be asked to select your wireless home network. Harmony Link
communicates with your Harmony Link app using your wireless home network, the same
one that your mobile device uses when you are at home.
You can select from the list of the available networks within range. If your network does
not show up in the list, click Other Network to manually connect to the network. Icons
appear within the list to indicate the strength of the network, and whether the network is
secure (requires a password).
To Next Page
Loading...
Need help?
General
