B
Brandon KellerJul 26, 2025
Why does my Logitech Remote Control turn on devices but select the wrong input?
- SShawn EdwardsJul 26, 2025
Several factors might cause this. First, the power-on delay for your device may be too short; try increasing it using your remote or MyHarmony. Second, incorrect device information could be the culprit; ensure you've entered the correct brand and model numbers for your devices. Finally, the wrong input may have been selected for that Activity during configuration. You can correct the input settings using your remote by following the steps in the Activities section, or in MyHarmony by following the steps in Changing Activity.