7
To connect the mouse’s hardware to the computer
This minor section is intended to aid you in connecting your mouse’s hardware to your computer. Your
mouse’s hardware must be connected to your computer to function correctly. Each step of the process is
accompanied by an image to aid comprehension.
Connecting your mouse to your computer requires you to have the mouse, the USB transceiver and the
computer.
To connect the mouse’s hardware to the computer:
1. Insert the USB transceiver into the computer’s USB drive. This will allow the computer to install
the necessary software to use the USB transceiver.
2. Wait for the computer to install the necessary software to use the USB transceiver before
continuing. This will allow the computer to transmit information to and from the mouse.
To Next Page
Loading...
Need help?
General
