27
Transporter™ Owner’s Guide
• Field-upgradable Xilinx CPLD
• 64Mb high-speed RAM
• 16Mb program ash
• Low-power design, fanless
• True 802.11g wireless networking (can be disabled)
• Bridging capability allows ethernet devices to connect to the network through the
wireless interface
• Throughput up to 54Mbps, high speed PCI interface to radio module
• Dual external antennas for improved range and throughput
• Supports all 802.11b and 802.11g access points
• Automatically detects available wireless networks for quick setup
• Supports both WPA Personal (WPA1+TKIP, WPA2+AES) and 64/128-bit WEP
encryption
• Wireless radio disabled when using ethernet connection
• True 100Mbps throughput
• Shielded CAT5 RJ-45 connector
• Connects to any 100Mbps or 10Mbps network
• Auto-detects full duplex and half duplex modes
• Automatic receive polarity correction
• Maximum cable length: 100 meters (328 feet)
• RS-232 connector for serial integration with Crestron and other home automation
systems
• 3.5mm infrared input connector
• 3.5mm infrared emitter connector
• 100-240v, 50-60Hz AC
• Internal Fuse: 500mA
• Standard IEC power connector
• Included IEC power cable specic to shipping destination
• Separate linear supplies for Analog, DAC, and clocks
• Auto-ranging, relay-controlled AC input
• Three Super Regulators for analog stages (+15, -15, +5)
• High-efciency, low noise SMPS for CPU, Display
• Continuous AC voltage monitoring
To Next Page
Loading...
Need help?
General
