Logitech Wireless Boombox User Manual

Logitech® Wireless Boombox
5English 5
1 Charge the Battery
2 Pair a Bluetooth device
To play audio from a Bluetooth device,
you need to first pair the device with the
Boombox. You can pair up to eight devices.
1. On your Bluetooth device, turn on
Bluetooth and scan for devices in its
Bluetooth menu.
2. Turn on the Boombox. When powering
up for the first time, the Boombox is
discoverable for 2 minutes and is ready
for pairing.
If pairing times out (the Bluetooth status
light blinks slowly before it turns o),
turn the Boombox o and then on to
make it discoverable again.
3. When “Logitech Boombox” appears on
the device list of your Bluetooth device,
select the Boombox. The Bluetooth
status light turns solid after pairing is
established.
Note: To pair additional Bluetooth devices, press
and hold the Bluetooth button until the Bluetooth
status light blinks rapidly. Repeat steps 1 and 3.
6

Logitech Wireless Boombox Specifications

General

Brand	Logitech
Model	Wireless Boombox
Category	Portable Stereo System
Language	English