v140822
Sun. Water. Life.
BERNT LORENTZ GmbH & Co. KG Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel. +49 (0) 4193 7548 - 0, Fax - 29, www.lorentz.de
All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may
differ from actual products depending on local market requirements and regulations.
6
3 Installation and Wiring
3.1 Purchase Inspection
If any abnormity is found, contact your distributor. Once
you get the product, please check according to the follow-
ing table.
3.2 Packing List
# Item QTY
1 PSk controller 1 unit
2 Operation manual 1 copy
3 Plug for the positive terminal of the
PV modules
2 pcs*
4 Plug for the negative terminal of the
PV modules
2 pcs*
5 Motor plug 1 pc
6 sensor plug 1 pc
Inspection item Inspection method
Consistency with ordered product Inspect the identification plate
Damage or exfoliation phenomenon Inspect whole appearance
Completeness of main machine and accessories Check according to the packing list
Looseness of fastening parts such as screws If necessary, inspect with screwdriver
3.3 Dimension and Weight
H1
W1
W
D1
D
d
Model Dimension [mm] Weight [kg]
W H D W1 H1 D1 d
all models 250 310 200 235 295 167 7 8.0
CAUTION: The PSk Controllers must be
mounted to a wall. Ensure that the
mounting backplane can support the
weight of the controller. Controller
must be protected from rain, moisture
and animals. Sufficient ventilation
must be provided.
Figure 2: Installation dimensions
*) for PS15k and PS21k: 4
To Next Page
Loading...
Need help?
General
