LS tractor MT347 User Manual

3 -39
(3) Four wheel drive lever (4WD)
 This lever is used to engage/disengage the four
wheel drive (4WD). Push it downward for
engaging the 4WD.
 Before operating the 4WD lever, press down the
clutch pedal, brake pedals, and stop the tractor
completely.
 4WD is very effective in the following cases.
- When increasing the towing power for heavy
work.
- In case of working in sandy soil.
- To prevent tractor from spinning in wet land.
Four wheel
drive lever
(4) Middle PTO lever (if fitted)
 It is used to engage/disengage the middle PTO
gear.
 Before operating the middle PTO lever, put PTO
switch to “OFF” position and stop the PTO shaft
completely.
 Pull the middle PTO lever up to engage the
middle PTO gear.
 For further information about the PTO shaft, see
chapter 4-5-(2) in this manual.
Middle PTO lever
ON
▶ When driving on public roads, disengage the 4WD. If not, it may cause damage of
the tires and transmission drive line and a serious accident. After working in the
field, disengage the 4WD before coming out from the field.
▶ While driving the tractor at high speed while the 4WD is engaged, sharp steering
may cause a serious accident.
▶ Only operate four wheel drive lever by hand. If stepping on it , it may cause a
failure.
Caution
2WD
4WD

LS tractor MT347 Specifications

General

Brand	LS tractor
Model	MT347
Category	Tractor
Language	English