Lufft V200A-UMB User Manual

Operating Manual V25/09.2019 Ventus / Ventus-X / V200A
Chapter 9 Installation 14
9 Installation
The sensor bracket is designed to be installed on the top of a mast with a diameter of 50mm or
2”.
The following tools are required for the installation:
 Hexagon socket 4.0
 Compass for aligning Ventus to the North
9.1 Fastening
Figure 3 Fastening to the Mast
 Loosen nuts
 Push the sensor onto the top of the mast from above
 Align the sensor to the North
 Tighten both nuts evenly and secure with locking varnish
Mast tube
Nuts

Lufft V200A-UMB Specifications

General

Brand	Lufft
Model	V200A-UMB
Category	Accessories
Language	English