English - 20
2. Press [] or [] to select the item to be modified [Transparency/Step/V
Size/H Size]. (For details, please refer to 5.2 Setting Menu.)
3. Press [] or [] to perform the modification.
4. Press [MENU] to exit the image OSD menu and return to the Mask
mode.
6.14 I would like to enlarge a part of the image (PAN)
Use Remote control:
1. Press [PAN] to enter the Partial Enlarged mode.
2. Press [], [], [], or [] to move and view the partial enlarged
images.
3. Press [PAN] to exit the partial enlarged mode.
6.15 I would like to play the slides (Slide Show)
6.15.1 Setting delay time
1. Press [MENU] on the Remote Control to enter the setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Delay].
4. Press [] or [] to select the delay time among [0.5 Sec/1 Sec/3 Sec/5
Sec/10 Sec/Manual].
5. Press [MENU] to exit.
6.15.2 Activate/Stop the slide show
<Note> Upper Limit: The maximum size of single photo is 7 MB.
1. Press [SLIDE SHOW] on the Remote Control to start playing.
2. Press [ENTER] to pause playing.
3. Press [ENTER] again to continue playing.
4. Press [SLIDE SHOW] again to stop playing.
To Next Page
Loading...
Need help?
General
