English - 16
Chapter 5 Start Using
When using the remote control, aim at the remote sensor on the
PC193, and press the power button.
Once PC193 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED does
not light up.
1. Place an object to be displayed
under the camera.
2. Turn on Power
.
3. Adjust the gooseneck and lens to
the appropriate positions.
4. Press [AUTO TUNE]
button
to optimize the image. You are
ready to teach/present.
Each time the camera head is
moved, please locate it and then
press [FOCUS] to refocus the lens.
To Next Page
Loading...
Need help?
General
