11
Clearing Values from Memory
1. Press the User-Switching key to select the memory zone 1 or memory zone 2.
2. Continue to press and hold the “M” key for approximately 5 seconds, and the data in the pre-
designated memory zone will be erased automatically.
Note : The data in both memory zones (zone 1 and zone 2) will be erased if any of the batteries
are removed, or if the AC adapter is disconnected from the unit or unplugged from the
outlet. (It is suggested that users record their data on the Blood Pressure Log before
removing or replacing batteries.)
Press “M” Key for
5 seconds to clear all
memories
To Next Page
Loading...
Need help?
General
