Lumiscope 1146 User Manual

14
13
15 16
12 Hour System
Conversion
Hour Display
Minute Display
Second Display
Hour Display
Minute Display
Second Display
24 Hour System
Conversion
Date Display Date Display
Adjusting Settings
4
Adjusting Settings
Press the “MEM” button and confirm whether the unit displays
the date and time after turning off.
P
ress the “SET” button and continue with step 5.
When the display function of the date and time is ON, the LCD will
display " " .
When the display function of the date and time is OFF, the LCD will
display " " .
Adjusting Settings
If selected to display the date and time, the current date and time
will display when unit has been turned off.
Adjusting Settings
6
After Volume has been set, ”0 mmHg” will display. Press the
“SET” button again to continue to the Set Language screen.
Press the “MEM” button to cycle between languages (English and
Spanish). Choose “ESP” to select SPANISH: the talking language will
change to Spanish.
Note that the language setting can only be changed during the initial
settings adjustment. The default language is English. If you later wish
to change the language setting, the batteries must be removed and
steps 1 to 6 repeated.
After Language has been set, ”0 mmHg” will display.
Press the “SET” button again to continue to the set user screen.
START
STOP
5
To set Display of date and time
To set Language (English / Spanish)To set Volume
Press the “MEM” button and the volume will cycle from 0 to 7.
Select desired volume level, press the “SET” button, and continue to step 6.
Press the “ ” button to save the current setting and turn the unit off.
When the volume is level 0, the LCD will display “ ” and the voice
function is OFF.
When the volume is set between level 1 and level 7, the LCD will
display “ ” and the voice function is ON.
......
Volume Level 7 Volume Level 0 Volume Level 1
Sound Symbol
Volume Level
Voice ON/OFF

Lumiscope 1146 Specifications

General

Brand	Lumiscope
Model	1146
Category	Blood Pressure Monitor
Language	English