MAAX Coleman Spas 630 Series User Manual

10
Electrical specifications
Electrical specifications
Warning: risk of electric shock
Read and follow all instructions
Important safety regulations
All electrical connections of this spa system
must ONLY be carried out be a qualified and
experienced engineer, in compliance with the
prevailing standards valid at the time of
installation.
NOTE:
Before you carry out any repairs to the spa,
DISCONNECT the electricity supply at the
main switch or the distribution board.
The electrical configurations for the operating
system are described in the following table.
GFCI
circuit-
breaker
16 A/1-polig
16 A/2-polig
16 A/2-polig
16 A/2-polig
Position
DIP-
switch
on
on
on
on
Input
230 V/16 A
2 x 230 V
16A
2 x 230 V
16A
2 x 230 V
16A
Heater
& high
speed pump
no
no
no
no
Heater
& low
speed pump
yes
yes
yes
yes
Number
of wires,
incl. ground
3
4
4
4
Maximum
power
taken
16
26
26
26
430 POWERWORKS SERIE SPA PACK
USED ON MODELS 104,105, 351 AND 361
432 POWERWORKS SERIE SPA PACK
USED ON MODEL 107
630 POWERWORKS SERIE SPA PACK
USED ON MODELS 461, 470, 471, 472, 480, 481 AND 482
736 POWERWORKS SERIE SPA PACK
USED ON MODELS 705 AND 706

MAAX Coleman Spas 630 Series Specifications

General

Brand	MAAX
Model	Coleman Spas 630 Series
Category	Hot Tub
Language	English