MAAX Coleman Spas 630 Series User Manual

07
Spa system components
F. Access to the drainage channel (next to
maintenance panel): Drainage taps on the spa
are on the kick-plate.
G. Manufacturer’s label: Contains identification
data for service under guarantee (serial number,
model number, etc.) and electrical information
(amp class and loads). Located on the kick-plate,
on the same side as the control panel on the top
of the spa.
H: Directional flap: Used to direct the water
stream from the jets to the jets in the open
seating area (not available in all models).
Spa system components
A. Skimmer: Removes floating dirt from the
surface of the water, creates a point for the water
to flow back to the pump and contains a filter
element.
B. Top side control panel: Used to set the
temperature, the jet pump and the lighting.
C. Air Controls: Used to increase or decrease
the amount of air in the jets. When heating the
water, it is a good idea to keep the Air Controls
closed for maximum energy savings.
D. Comfort Collar™ flap: Used to regulate
the water supply to the Comfort Collar™ jets
(not available in all models).
E. Technical equipment (contains no user-
serviceable components): One or two pumps,
heater and associated electrical controls (not listed).

MAAX Coleman Spas 630 Series Specifications

General

Brand	MAAX
Model	Coleman Spas 630 Series
Category	Hot Tub
Language	English