06
Important safety instructions
would otherwise cause damage or someone
to slip.
3. The floor must be flat with an anti-slip
finish. Carpet is not recommended.
4. The walls, ceiling and woodwork must be
constructed of a material with high resistance
to damp.
5. Check whether the floor can carry the
full weight of the spa and water.
6. The spa must be checked for leaks before
installation to avoid any possible water
damage. This service may also be part of
your supplier’s installation service.
7. Conservatories can retain a high ambient
temperature, which can also affect the water
temperature of the spa. Under these
conditions we do not recommend running
the filter cycles for longer than 6 hours
per day.
To Next Page
Loading...
Need help?
General
