10
CARE AND MAINTENANCE
WARNING: ALWAYS UNPLUG THE UNIT FROM THE ELECTRICAL OUTLET AND ALLOW
ALL PARTS TO COMPLETELY COOL BEFORE DISASSEMBLING IT FOR CLEANING.
NEVER IMMERSE THE HEATING ELEMENT OR LID IN WATER OR ANY OTHER LIQUID.
NOTE: Clean the product after each use.
1. Unplug the oven and let it cool.
2. Wash the glass bowl in hot, soapy water and dry thoroughly. Clean the exterior of the base
by wiping it with a soft, damp cloth.
3. Wipe the lid and fan housing using a damp, clean dish cloth or sponge with a little mild
dishwashing detergent.
Do not clean the glass bowl or lid with steel-wool pads or abrasive materials.
4. Wash the wire racks in mild dishwashing detergent and water.
5. Clean metal parts using a sponge or dish cloth with mild dishwashing detergent, then wipe
clean. If scrubbing is necessary, use a nylon or polyester mesh pad or a brush.
6. Store in a cool, dry area.
The oven has a WASH setting on the temperature control.
1.
Remove any food and drain fat away from the base.
2.
Pour small amount of water in
the bowl and turn the
convection oven to WASH.
detergent will rinse the
3.
The racks can be left in the bowl at the same time to soften any deposits.
4.
You may need to use a washing brush for any stubborn debris before
rinsing and wiping
clean.
WASH Setting
The combination of the heat, swirling
motion of water and detergent will rinse the glass bowl.
To Next Page
Loading...
Need help?
General
