The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in
part of or whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained
personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2014 Mahindra & Mahindra Ltd.
KEY ASSIGNMENT PROCESS
Whenever the key is replaced and if the vehicle is with keyless entry then the remote learning
has to be performed
Key
Request
• Customer Verification
Key
Order
• Order new key using the Duplicate Key Request (DKR) process.
TPK1
• Select "Key Programming"
•SMART tester will generate Tool Programming Key-1 - Valid for 48 hours.
•Raise a TAR along with Tool Programming Key – 1 (TPK1)
ASC1
• TEKline will provide After Sales Code - 1 (ASC1) based on TPK1
• ASC1 is valid until TPK1 is valid.
TPK2
• Based on the ASC1, reassign key. SMART tester will generate Tool Programming
Key – 2 (TPK2)
• TPK2 to be provided to TEKliner
ASC2
• TEKline will provide After Sales code -2 (ASC2)
Finish
• CoTEK will enter the ASC2 and complete the Key assignmnet session
• Close TAR
DIAGNOSTIC MANUAL
SCORPIO
To Next Page
General
