INFOTAINMENT SYSTEM
V102011© Copyright Mahindra & Mahindra Ltd.
3-11
Audio Settings
Volume control
• Rotate the volume knob to increase
or decrease the volume
• The volume control is same across
audio sources (Tuner, CD, AUX)
• When the volume level has been
adjusted the infotainment system
displays the volume level for 5
seconds
• When the volume level is adjusted to
“0”, the audio will be inaudible, and
unit will flash “MUTE” icon. If unit is
in CD / MP3 mode, the playing
wouldn’t pause
• Unit will flash “MUTE” until the user
changes the volume again. But
during other operations, the
associated information will be
displayed
Standard volume adjustment
• When the unit is switched ON
(Power ON or Ignition ON), the
volume will be restored to its
previous setting if the previous
volume is from 15 to 35
• The volume will be set to 15 if the
previous volume is less than 15. The
volume will be set to 35 if the
previous volume is more than 35.
• If there is no previous volume level
stored, the volume level will be 15
(default).
Audio options
• Press [EQ] button to enter Audio
setting
• At each short press of [EQ] button,
audio setting will be changed in the
sequence Bass
Bass
• Use volume knob to adjust to the
value of each audio setting
Bass / treble tone control
The Bass / treble level can be adjusted
from -7 to +7.
When the bass / treble tone level is
adjusted, unit will display the adjusted
level.
The user can select the equalizer audio
setting via [EQ] button short press, at
each short press of [EQ] the audio setting
will change according to the sequence
Bass
Bass. Use volume knob
clockwise / anti-clockwise to increase or
decrease the bass / treble tone by one
level in range (-7…0…+7). Default bass /
treble tone setting will be zero.
The same bass / treble level will be used
between the tuner, CD, AUX audio
sources.
Fade control
The fade setting will have 15 levels of
adjustment from front 7 to rear 7.The fade
defines the relative audio output of the
front and rear channels.The user can
select the equalizer audio setting via [EQ]
button short press, at each short press of
[EQ] the audio setting will change
according to the sequence Bass