Sharpening planer blades
71
Always keep your blades sharp for the best
performance possible. Use the sharpening
holder to remove nicks and produce
a
fine
edge.
First, loosen the
two
wing nuts on the
holder and insert the blades (A) and
(B)
so
that they contact the sides
(C)
and
(D).
Then tighten the wing nuts.
Immerse the dressing stone in water for
2
or
3
minutes before sharpening. Hold the
holder
'so
that the blades both contact the
dressing stone for simultaneous sharpening
at
the same angle.
I
Wing
nut
11
To Next Page
Loading...
Need help?
General
