Shiplapping
To
make
a
stepped cut
as
shown
at
the right, use the edge
fence.
Cutting line
I
Adjust the edge fence until
it
comes in con-
tact with the side of the workpiece, then
secure
it
by tightening the screw.
You may wish to add to the length
of
the
fence by attaching an extra piece of wood.
Convenient holes are provided in the fence
for this purpose, and also for attaching an
extension guide (optional accessory).
NOTE
:
When planing, move the tool with the edge fence flush with the side of the workpiece.
Otherwise uneven planing may result.
Max. shiplapping depth
is
23
mm
(15/16").
9
To Next Page
Loading...
Need help?
General
