To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Makita 4101RH and is the answer not in the manual?
General| Input power | 860 W |
|---|---|
| Power source | AC |
| AC input voltage | 230 V |
| Noise level | 109 dB |
| Diamond disc | Yes |
| Diamond disc diameter | 110 mm |
| Diamond disc bore size | 20 mm |
| Idle speed (max) | 13800 RPM |
| Cutting depth (45º) | 21 mm |
| Cutting depth (90º) | 34 mm |
| Product color | Black, Blue |
Weight and Dimensions| Depth | 171 mm |
|---|---|
| Width | 220 mm |
| Weight | 5200 g |
Covers general safety for work area, explosive atmospheres, bystanders, and electrical grounding.
Emphasizes staying alert, dressing properly, avoiding accidental starting, and using safety equipment.
Details proper tool usage, maintenance, and handling of accessories for safe operation.
Provides guidance on selecting appropriate extension cords and proper grounding procedures.
Essential safety rules for operating the tile cutter, focusing on hand placement, body position, and wheel safety.
Explains kickback causes and provides essential methods for preventing and controlling it.
Covers safety related to wheel selection, accessory use, and precautions for wet conditions and GFCI protection.
Explains how to test and use the GFCI protection feature for electrical safety.
Details the procedure for setting the desired cutting depth using the depth guide.
Describes how to set and perform bevel cuts using the angle adjustment feature.
Explains how to align the tool with the cutting line for accurate straight and bevel cuts.
Covers the operation of the switch trigger and lock-off button for safe starting and stopping.
Provides step-by-step instructions for securely installing and removing the diamond wheel.
Details the components and purpose of the pressure regulator assembly for water connection.
Guides the user through connecting the water pipe and pressure regulator assembly to the tool.
Instructions on how to properly install the protective cover (A) onto the tool.
Explains the correct method for holding, starting, and advancing the tool during cutting.
Describes methods to maintain the cutting efficiency of the diamond wheel.
Instructions for cleaning and reattaching the tool's protective covers (A) and (B).
Details how to check and replace worn carbon brushes to ensure tool performance.
