Makita 4327 User Manual

2 ENGLISH
SPECIFICATIONS
Model 4326 4327 4328 4329 4326M 4327M
Length of stroke 18 mm 18 mm 18 mm 18 mm 18 mm 18 mm
Blade type B type Makita type
Max. cutting capacities Wood 65 mm 65 mm 65 mm 65 mm 40 mm 40 mm
Mild steel 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm
Strokes per minute (min
-1
) 3,100 500 - 3,100 500 - 3,100 500 - 3,100 3,100 500 - 3,100
Overall length 217 mm
(Steel
base type)
217 mm
(Steel
base type)
217 mm 223 mm 217 mm 217 mm
223 mm
(Aluminum
base type)
223 mm
(Aluminum
base type)
Net weight 1.9 kg 1.9 kg 1.8 kg 1.9 kg 1.8 kg 1.8 kg
Safety class
/II /II /II /II /II /II
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• Weight according to EPTA-Procedure 01/2014
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.

Makita 4327 Specifications

General

Stroke height	18 mm
No-load stroke rate	3100 spm
Input power	450 W
Power source	AC
Cutting depth in wood	65 mm
Product color	Black, Blue
Bevel adjustment	Yes
Bevel capacity (max)	45 °

Weight and Dimensions

Depth	217 mm
Width	77 mm
Height	197 mm
Weight	1800 g