Makita 5604R User Manual

9
Guide rule (Fig. 17)
The handy guide rule allows you to do extra-accurate
straight cuts. Simply slide the guide rule up snugly
against the side of the workpiece and secure it in
position with the bolt on the front of the base. It also
makes repeated cuts of uniform width possible.
Joint assembly (Fig. 18 & 19)
(for connecting a vacuum cleaner)
When you wish to perform clean cutting operation,
connect a vacuum cleaner to your tool. Then connect
a hose of vacuum cleaner to the joint.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Replacement of carbon brushes (Fig. 20 & 21)
Replace carbon brushes when they are worn down to
the limit mark. Both identical carbon brushes should
be replaced at the same time.
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by
a Makita Authorized Service Center.

Makita 5604R Specifications

General

Input power	950 W
Cable length	2.5 m
Power source	AC
AC input voltage	230 V
Blade diameter	165 mm
Idle speed (max)	5000 RPM
Cutting depth (45º)	35 mm
Cutting depth (90º)	54 mm
Noise level	93 dB

Weight and Dimensions

Depth	320 mm
Width	243 mm
Height	235 mm
Weight	3600 g