Makita AF505 User Manual

2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
END106-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..................Read instruction manual.
..................Wear safety glasses.
..................Do not use on scaffoldings, ladders.
ENG046-1
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 81 dB (A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
These values have been obtained according to EN792.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents;
EN792 in accordance with Council Directives, 98/37/EC.
Yasuhiko Kanzaki CE 2006
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
Model AF505
Air pressure 0.39 - 0.78 Mpa (3.9 - 7.8 bar)
Nail Iength 15 mm - 50 mm
Nail capacity 100 pcs.
Dimensions (L X H X W) 260 mm X 64 mm X 237 mm
Min. hose diameter 6.5 mm
Net weight 1.4 Kg

Makita AF505 Specifications

General

Magazine capacity	100
Nail lengths supported	15 - 50 mm
Nail diameters supported	1.05 - 1.26 mm
Maximum operating pressure	8 bar
Minimum operating pressure	4 bar
Product color	Black, Green, Metallic
Belt hook included	Yes
Power source	Pneumatic

Weight and Dimensions

Weight	1400 g