Makita AF505 User Manual

6
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always disconnect the hose before adjusting or checking function on the
tool.
Adjusting depth of nailing
To adjust the depth of nailing, turn the adjuster. The depth of nailing is the
deepest when the adjuster is turned fully in the A direction shown in the figure.
It will become shallower as the adjuster is turned in the B direction. If nails
cannot be driven deep enough even when the adjuster is turned fully in the A
direction, increase the air pressure. If nails are driven too deep even when the
adjuster is turned fully in the B direction, decrease the air pressure. Generally
speaking, the tool service life will be longer when the tool is used with lower air
pressure and the adjuster set to a lower depth of nail driving.
CAUTION:
• Always disconnect the hose before adjusting the depth of nailing.
Hook
CAUTION:
• Always disconnect the hose from the tool.
• Never hook the tool at high location or on potentially unstable surface.
The hook is convenient for hanging the tool temporarily.
ASSEMBLY
CAUTION:
• Always disconnect the hose before carrying out any work on the tool.
• Load the same kind, size and uniform length of nails when loading nails
in the magazine.
Loading nailer
Press the lever and open the sliding door of the magazine by pulling it toward
yourself with the lever pressed.
1. Adjuster
1
A
B
007181
1. Hook
1
007182
007183

Makita AF505 Specifications

General

Magazine capacity	100
Nail lengths supported	15 - 50 mm
Nail diameters supported	1.05 - 1.26 mm
Maximum operating pressure	8 bar
Minimum operating pressure	4 bar
Product color	Black, Green, Metallic
Belt hook included	Yes
Power source	Pneumatic

Weight and Dimensions

Weight	1400 g