Makita BO4555 User Manual

2 ENGLISH
SPECIFICATIONS
Model BO4555 BO4556 BO4558 BO4557
Pad size 112mm ×102mm
Orbits per minute (min
-1
) 14,000
Dimensions (L x W x H)
131 mm x 112 mm
x 142 mm
131 mm x 112 mm x 141 mm 131 mm x 112 mm
x 137 mm
Net weight 1.1 kg 1.2 kg 1.0 kg
Safety class
/II
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• WeightaccordingtoEPTA-Procedure01/2014
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
InobservanceoftheEuropeanDirective,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipmentthathavereachedtheendof
their life must be collected separately and
returnedtoanenvironmentallycompatible
recycling facility.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply
ofthesamevoltageasindicatedonthenameplate,
and can only be operated on single-phase AC supply.
They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
darkareasinviteaccidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Use of power supply via an RCD with a rated
residual current of 30 mA or less is always
recommended.
8.
Power tools can produce electromagnetic elds
(EMF) that are not harmful to the user.However,
users of pacemakers and other similar medical
devicesshouldcontactthemakeroftheirdeviceand/
ordoctorforadvicebeforeoperatingthispowertool.
9. Do not touch the power plug with wet hands.
10. If the cord is damaged, have it replaced by the
manufacturer or his agent in order to avoid a
safety hazard.

Makita BO4555 Specifications

General

Power	200 W
Type of sander	Orbital sander
Cable length	2 m
Power source	AC
AC input voltage	230 V
Eccentricity	0.75 mm
Oscillating orbit diameter	1.5 mm
Idle oscillation rate (max)	14000 OPM

Weight and Dimensions

Depth	131 mm
Width	112 mm
Height	142 mm
Weight	1100 g
Sanding plate size (WxD)	112 x 102 mm