EasyManuals Logo

Makita DLM432Z User Manual

Makita DLM432Z
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6 ENGLISH
11. When disposing the battery cartridge, remove
it from the tool and dispose of it in a safe
place. Follow your local regulations relating to
disposal of battery.
12. Use the batteries only with the products
specied by Makita. Installing the batteries to
non-compliantproductsmayresultinare,exces-
siveheat,explosion,orleakofelectrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
havebeenaltered,mayresultinthebatterybursting
causingres,personalinjuryanddamage.Itwill
alsovoidtheMakitawarrantyfortheMakitatooland
charger.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).
ASSEMBLY
WARNING: Always be sure that the lock key
and battery cartridge are removed before carrying
out any work on the mower. Failure to remove the
lockkeyandthebatterycartridgemayresultinseri-
ouspersonalinjuryfromaccidentalstart-up.
WARNING: Never start the mower unless it is
completely assembled. Operation of the machine
inapartiallyassembledstatemayresultinserious
personalinjuryfromaccidentalstart-up.
Installing the battery cover
WARNING: Do not insert the lock key and bat-
tery cartridge before installing the battery cover.
Failuretodosomaycauseaseriousinjury.
Installthebatterycovercompletelybeforetheopera-
tion.Thebatterycoverprotectsthemowerandbattery
cartridge from mud, dirt, and water.
1. Placethebatterycoverwiththeprotrusionsonthe
moweralignedwiththeholesonthebatterycover.
3
1
2
►1. Protrusion 2. Hole 3.Batterycover
2. Placeyourhandsinthemiddleofthebattery
cover and push it.
3. Beforetherstoperation,checkthatthepivot
pointofthebatterycoverisattachedproperly.Ifthe
batterycoverisinstalledcorrectly,itwillnotopenuntil
thebatterycoverlockingleverispulled.
1
2
►1. Pivot point 2.Batterycoverlockinglever

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita DLM432Z and is the answer not in the manual?

Makita DLM432Z Specifications

General IconGeneral
Cutting width430 mm
Grass catcherYes
Number of wheels4 wheel(s)
Rotational speed3600 RPM
Maximum lawn area575 m²
Sound power level92 dB
Standard deviation3 dB
Rear wheels diameter160 mm
Sound pressure level81 dB
Front wheels diameter140 mm
Maximum cutting height75 mm
Minimum cutting height20 mm
Grass collecting volume50 L
Number of height positions13
Power sourceBattery
Battery voltage18 V
Weight and Dimensions IconWeight and Dimensions
Depth1490 mm
Width460 mm
Height1045 mm

Related product manuals