0
100
(1020)
120
(1224)
80
(816)
60
(612)
40
(408)
20
(204)
M12
M14
M10
M12
M14
M10
M8
M8
3
1.2.
3.
diameter
High tensile bolt
32
1
N•m
(kgf•cm)
210
80
(816)
60
(612)
40
(408)
20
(204)
3
100
(1020)
120
(1224)
M10
M12
M12
M8
M8
M10
1.2.
3.
diameter
the tool on to start operation.
NOTICE: If you use a spare battery to continue
the operation, rest the tool at least 15 min.
NOTE:
bolt that you wish to use.
NOTE: When fastening M8 or smaller screw, choose
the switch trigger so that the screw is not damaged.
NOTE: Hold the tool pointed straight at the screw.
NOTE: If the impact force is too strong or you tighten
the screw or the point of the driver bit may be over-
stressed, stripped, damaged, etc. Before starting your
proper fastening time for your screw.
1. When the battery cartridge is discharged almost
completely, voltage will drop and the fastening
2. Driver bit or socket bit
Failure to use the correct size driver bit or socket
3. Bolt
class of bolt are the same, the proper fasten-
-
ter of bolt.
To Next Page
Loading...
Need help?
General
