2 ENGLISH
SPECIFICATIONS
Model: DTD155
Fastening capacities Machine screw 4 mm - 8 mm
Standard bolt 5 mm - 14 mm
High tensile bolt 5 mm - 12 mm
No load speed Hard impact mode 0 - 3,000 min
-1
Soft impact mode 0 - 1,300 min
-1
Impacts per minute Hard impact mode 0 - 3,900 min
-1
Soft impact mode 0 - 1,600 min
-1
Rated voltage D.C. 18 V
Overall length 135 mm
Battery cartridge BL1815, BL1815N, BL1820, BL1820B, BL1830, BL1830B,
BL1840, BL1840B, BL1850, BL1850B, BL1860B
Charger DC18RC, DC18RD, DC18SD, DC18SE, DC18SF
Net weight 1.2 - 1.5 kg
without notice.
-
Symbols
-
ment. Be sure that you understand their meaning before
use.
Only for EU countries
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
and their implementation in accordance
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
and plastic.
Noise
-
ing to EN62841:
WARNING: Wear ear protection.
Vibration
-
mined according to EN62841:
-
mum capacity of the tool
h
2
2
NOTE:
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:
may also be used in a preliminary assessment of
WARNING:
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
EC Declaration of Conformity
For European countries only
to this instruction manual.
To Next Page
Loading...
Need help?
General
