Makita ELM3320 User Manual

2 ENGLISH
SPECIFICATIONS
Model: ELM3320 ELM3720 ELM4120
No load speed 3,400 min
-1
Cutting height 20 mm - 55 mm 20 mm - 75 mm
Cutting width 330 mm 370 mm 410 mm
Part number of replacement mower blade YA00000731 YA00000732 YA00000733
Dimensions
(L x W x H)
During operation
(with grass basket)
L: 1,040 mm to
1,230 mm
W: 380 mm
H: 870 mm to
1,110 mm
L: 1,140 mm to
1,330 mm
W: 415 mm
H: 890 mm to
1,120 mm
L: 1,255 mm to
1,470 mm
W: 460 mm
H: 955 mm to
1,230 mm
When stored
(without grass basket)
350 mm x 380 mm x
1,090 mm
335 mm x 415 mm x
1,090 mm
395 mm x 460 mm x
1,220 mm
Net weight 10.2 kg 11.6 kg 14.5 kg
Safety class
/II
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Read the instruction manual.
DOUBLE INSULATION
Danger;beawareofthrownobjects.
The distance between the tool and
bystanders must be at least 15 m.
Wait until all machine components have
completely stopped before touching them.
Keepthesupplyexiblecordawayfrom
the cutting blades.
Beware of sharp blades. Blades continue
to rotate after the motor is switched off.
Remove the plug from the machine before
maintenance or if cord is damaged.
The noise of the machine is not more than
96 dB.
Keep hands and feet away. Do not operate
mower unless the guards and attachments
are in proper place.
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The machine is intended for lawn mowing. Do not use
the machine for other purposes. Use of the machine for
operations other than the intended use could result in a
hazardous situation.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent in order to avoid
a hazard.
For public low-voltage distribution
systems of between 220 V and 250 V
Switching operations of electric apparatus cause
voltageuctuations.Theoperationofthisdevice
under unfavorable mains conditions can have adverse
effects to the operation of other equipment. With a
mains impedance equal or less than 0.425 Ohms (for
ELM3720) or 0.427 Ohms (for ELM4120), it can be pre-
sumed that there will be no negative effects. The mains
socket used for this device must be protected with a
fuse or protective circuit breaker having slow tripping
characteristics.

Makita ELM3320 Specifications

General

Type	Walk behind lawn mower
Easy to use	Yes
Cutting width	33 mm
Grass catcher	No
Product color	Black, Turquoise
Maximum lawn area	400 m²
Mulching function	-
Handle(s) features	Adjustable
Maximum cutting height	55 mm
Minimum cutting height	20 mm
Number of height positions	3
Power source	AC

Weight and Dimensions

Depth	1230 mm
Width	380 mm
Height	1110 mm