Model No.
Description
PRODUCT
T
ECHNICAL INFORMATION
CONCEPT AND MAIN APPLICATIONS
P 1 / 20
Specification
Standard equipment
Note: The standard equipment for the tool shown above may differ from country to country.
Dimensions: mm (")
Width (W)
Height (H)
Length (L) 357 (14) 362 (14-1/4) 370 (14-1/2)
84 (3-5/16)
HR2230
HR2460
HR2460F
HR2470
HR2470F
394 (15-1/2)
HR2470T
HR2470FT
214 (8-3/8)
Bit shank
SDS-plus [Round shank bit is available by
replacing quick change chuck for SDS-plus
with quick change drill chuck (keyless)]
780
HR2230 HR2460/ HR2460F
Yes
Yes
24 (15/16)
Europe: 4.0 (13.1) Australia: 2.0 (6.6)
Yes
0 - 1,100
0 - 4,500
HR2470/ HR2470F
2.6 (5.9)
SDS-plus
710
22(7/8)
2.5 (5.6)
13 (1/2)
32 (1-1/4)
0 - 1,050
0 - 4,050Impacts per minute= min -1
No load speed: min -1= rpm
HR2230, HR2460, HR2460F
HR2470, HR2470F, HR2470T, HR2470FT
Rotary Hammers 22mm (7/8"), 24mm (15/16")
The subject models are successors to the current models called "2kg Rotary hammer".
HR2230, HR2460 and HR2460F have two operation modes (Rotation only / Rotation
with hammering).
HR2470, HR2470F, HR2470T and HR2470FT have three operation modes
(Rotation only / Rotation with hammering / Hammering only).
The letters of the model name show the features as follows;
HR22 or 24: Capable of drilling 22 or 24 mm diameter hole
to concrete
F: Equipped with LED to illuminate the hammering spot
T: Changeable between a chuck for SDS-plus and keyless
three-jaw drill chuck quickly without any tool
Continuous rating input: W
Specification
Double insulation
Net weight: kg (lbs)
Depth gauge ........................ 1 pc Side handle ...................... 1 pc Plastic carrying case .........1 pc
HR2470T/ HR2470FT
2.8 (6.3)
Power supply cord: m (ft)
Variable speed control switch
Rotation reversing facility
Single-light LED ("F" model only)No
2.4 (5.4)
Job light
Operation mode
2 modes 3 modes
Concrete
Steel
Wood
Capacity:
mm (")
Model
Optional accessories
* T.C.T hammer drill bits 5.5mm - 24mm (7/32" - 15/16")
[HR2230: Maximum 22mm (7/8")]
* Bull point 14mm (9/16")
* Cold chisel 20mm (13/16")
* Scaling chisels 38mm and 50mm (1-1/2" and 2")
* Grooving chisels 8mm and 12mm (5/16" and 1/2")
* Scraper assembly
* Core bits
W
L
H
Others: 2.5 (8.2)
(Rotation only/ Rotation with
Hammering)
710
710
710
710
390
390
390
390
390
350
350
350
350
350
550
550
550
550
550
500
500
500
500
500
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output(W)
110 6.8
HR2230
6.2
3.4
3.3
3.1
7.5
Except HR2230
6.7
3.7
3.6
3.4
120
220
230
240
HR2230 Except HR2230 HR2230 Except HR2230 HR2230 Except HR2230
Current (A)
50 / 60
50 / 60
50 / 60
50 / 60
50 / 60
780
780
780
780
(Rotation only/ Rotation with Hammering/
Hammering only)
* Center bits
* Core bit adaptor
* Rod 10
* Core bits (dry type)
* Taper shank adaptor
* Taper shank T.C.T.hammer drill bits
* Drill chuck ass'y
* Drill chuck S13
* Chuck key S13
* Quick change drill chuck (keyless)
* Quick change chuck for SDS-Plus
* Dust cups 5 and 9
* Safety goggle
* Bit grease
* Blow out bulb
* Dust extractor attachment
* Hammer service kit
To Next Page
Need help?
General
