Makita LS002G User Manual

2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: LS002G
Blade diameter 216 mm (8-1/2″)
Hole (arbor) diameter (country specic) 15.88 mm (5/8″)
Max. kerf thickness of the saw blade 2.4 mm (3/32″)
Max. miter angle Left 60°, Right 60°
Max. bevel angle Left 48°, Right 48°
No load speed 4,800 /min
Dimensions (L x W x H) 702 mm x 551 mm x 557 mm (27-5/8″ x 21-3/4″ x 22″)
Rated voltage D.C. 36 V - 40 V max
Net weight 16.4 - 17.0 kg (36.2 - 37.6 lbs)
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may di󰀨er from country to country.
• The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Cutting capacities (H x W) with blade 216 mm (8-1/2″) in diameter
Miter angle Bevel angle
45° (left) 0° 45° (right)
0° 50 mm x 312 mm
(2″ x 12-1/4″)
70 mm x 312 mm
(2-3/4″ x 12-1/4″)
30 mm x 312 mm
(1-3/16″ x 12-1/4″)
45° (left and right) 50 mm x 220 mm
(2″ x 8-5/8″)
70 mm x 220 mm
(2-3/4″ x 8-5/8″)
30 mm x 220 mm
(1-3/16″ x 8-5/8″)
60° (left and right) – 70 mm x 155 mm
(2-3/4″ x 6-1/8″)
–
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.

Makita LS002G Specifications

General

Brand	Makita
Model	LS002G
Category	Saw
Language	English