Makita LS0714 User Manual

2
SPECIFICATIONS
Model ................................................................................................................LS0714/ LS0714F/ LS0714FL/ LS0714L
Blade diameter.....................................................................................................................................................190 mm
Hole (arbor) diameter.............................................................................................................................................20 mm
Max. Miter angle ................................................................................................................................ Left 47° , Right 57°
Max. Bevel angle................................................................................................................................... Left 45°, Right 5°
Max. Cutting capacities (H x W) with blade 190 mm in diameter.
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 20 mm thick.
2: When using a wood facing 15 mm thick.
3: When using a wood facing 10 mm thick.
No load speed (min
-1
) ..............................................................................................................................................6,000
Laser Type (LS0714FL/L) ........................................................................ Red Laser 650 nm, < 1mW ( Laser Class 2 )
Dimensions (L x W x H) ..................................................................................................... 670 mm x 430 mm x 458 mm
Net weight..................................................LS0714: 12.5 kg, LS0714F: 12.8 kg, LS0714FL: 13.1 kg, LS0714L: 13.0 kg
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Miter angle
Bevel angle
45° (left) 0° 5° (right)
0°
* 45 mm x 265 mm Note1 * 60 mm x 265 mm Note 1 -----
40 mm x 300 mm 52 mm x 300 mm 40 mm x 300 mm
45° (left and right)
* 45 mm x 185 mm Note2 * 60 mm x 185 mm Note 2 -----
40 mm x 212 mm 52 mm x 212 mm
57° (right) -----
* 60 mm x 145 mm Note 3
-----
52 mm x 163 mm

Makita LS0714 Specifications

General

Input power	1010 W
Power source	AC
Blade bore	20 mm
Blade diameter	190.5 mm
Idle speed (max)	6000 RPM
Bevel setting (left)	45 °
Miter setting (left)	47 °
Bevel setting (right)	5 °
Miter setting (right)	57 °
Cutting capacity 45° miter	52 x 212 mm

Weight and Dimensions

Depth	672 mm
Width	431.8 mm
Height	457.2 mm
Weight	13700 g