Makita LS1219L User Manual

2 ENGLISH
SPECIFICATIONS
Model: LS1219 LS1219L
Blade diameter 305 mm
Hole diameter European countries 30 mm
Countries other than Europe 25.4 mm or 30 mm
(country specic)
Max. kerf thickness of the saw blade 3.2 mm
Max. miter angle Right 60°, Left 60°
Max. bevel angle Right 48°, Left 48°
No load speed (RPM) 3,200 min
-1
Laser type - Red Laser 650 nm, Maximum output
1.6mW ( Laser Class 2M )
Dimensions (L x W x H) 898 mm x 690 mm x 725 mm
Net weight 30.2 kg 30.4 kg
Safety class
/II
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Cutting capacities (H x W)
Miter angle Bevel angle
45° (left) 0° 45° (right)
0° - 61 mm x 382 mm
71 mm x 363mm
92 mm x 382 mm
107 mm x 363 mm
44 mm x 382 mm
54 mm x 363 mm
Thickness of wood
facing on guide
fence for increased
height of cut
20 mm 78 mm × 325 mm 115 mm × 325mm 61 mm × 325 mm
38 mm 80 mm × 292 mm 120 mm × 292 mm -
45° (right and left) - 61 mm x 268 mm
71 mm x 255 mm
92 mm x 268 mm
107 mm x 255 mm
44 mm x 268 mm
54 mm x 255 mm
Thickness of wood
facing on guide
fence for increased
height of cut
15 mm - 115 mm × 227 mm -
25 mm 120 mm × 212 mm
60° (right and left) - - 92 mm x 185 mm
107 mm x 178 mm
-
Thickness of wood
facing on guide
fence for increased
height of cut
15 mm 115 mm × 155 mm
25 mm 120 mm × 140 mm
Cutting capacities for special cuttings
Type of cutting Cutting capacity
Crown molding 45° type
(with crown molding stopper used)
203 mm
Base board
(with horizontal vise used)
171 mm

Makita LS1219L Specifications

General

Input power	1800 W
Cable length	2.5 m
Power source	AC
Vibration level	2.5 m/s²
Idle speed (max)	3200 RPM
Sound power level	100 dB
Miter setting (left)	60 °
Sound pressure level	91 dB
Bevel setting (right)	48 °
Sound level uncertainty	3 dB
Vibration level uncertainty	1.5 m/s²
Bevel cut capacity (0° x 45°)	54 x 363 mm
Blade bore	30 mm
Blade diameter	305 mm
Saw blade included	Yes
Package type	Box
Product type	Sliding compound-miter saw
Cutting capacity 0°	382 mm
Bevel type	Single bevel

Weight and Dimensions

Depth	898 mm
Width	644 mm
Height	725 mm
Weight	29500 g