Makita LS1219L User Manual

9 ENGLISH
Installing the dust extraction hose
Connect the dust extraction hose to the tool as
illustrated.
Make sure that the elbow and the sleeve t properly to
the ports of the tool.
1
3
2
4
► 1. Dust extraction hose 2. Elbow 3. Sleeve 4. Port
To remove the elbow from the port, pull the elbow while
pressing down the lock button.
1
2
► 1. Lock button 2. Elbow
Bench mounting
When the tool is shipped, the handle is locked in the
lowered position by the stopper pin. While lowering the
handle slightly, pull the stopper pin and rotate it 90°.
1
3
2
► 1. Locked position 2. Unlocked position 3. Stopper
pin
This tool should be bolted with four bolts to a level and
stable surface using the bolt holes provided in the tool's
base. This will help prevent tipping and possible injury.
432 mm (17")
=ɸ8.0x 4
1
1
1
352 mm
(13-7/8")
► 1. Bolt
WARNING: Ensure that the tool will not move
on the supporting surface. Movement of the miter
saw on the supporting surface while cutting may
result in loss of control and serious personal injury.

Makita LS1219L Specifications

General

Input power	1800 W
Cable length	2.5 m
Power source	AC
Vibration level	2.5 m/s²
Idle speed (max)	3200 RPM
Sound power level	100 dB
Miter setting (left)	60 °
Sound pressure level	91 dB
Bevel setting (right)	48 °
Sound level uncertainty	3 dB
Vibration level uncertainty	1.5 m/s²
Bevel cut capacity (0° x 45°)	54 x 363 mm
Blade bore	30 mm
Blade diameter	305 mm
Saw blade included	Yes
Package type	Box
Product type	Sliding compound-miter saw
Cutting capacity 0°	382 mm
Bevel type	Single bevel

Weight and Dimensions

Depth	898 mm
Width	644 mm
Height	725 mm
Weight	29500 g