Makita LS1219L User Manual

1
► 1. Brush holder cap
After replacing brushes, plug in the tool and break in brushes
by running tool with no load for about 10 minutes. Then check
the tool while running and electric brake operation when
releasing the switch trigger. If the electric brake is not working
correctly, have the tool repaired by a Makita service center.
After use
After use, wipe off chips and dust adhering to the tool with a
cloth or the like. Keep the blade guard clean according to the
directions in the previously covered section titled "Blade guard".
Lubricate the sliding portions with machine oil to prevent rust.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL ACCESSORIES
WARNING: These Makita accessories or attach-
ments are recommended for use with your Makita tool
specied in this manual. The use of any other accesso-
ries or attachments may result in serious personal injury.
WARNING: Only use the Makita accessory or
attachment for its stated purpose. Misuse of an acces-
sory or attachment may result in serious personal injury.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Steel & Carbide-tipped saw blades
• Vertical vise
• Horizontal vise
• Crown molding stopper set
• Dust bag
• Triangular rule
• Hex wrench
• Hex wrench (for LS1219L)
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
www.makita.com
Makita Europe N.V.
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japa
n
Jan-Baptist Vinkstraat 2,
3070 Kortenberg, Belgium
885618B222
EN
20190209

Makita LS1219L Specifications

General

Input power	1800 W
Cable length	2.5 m
Power source	AC
Vibration level	2.5 m/s²
Idle speed (max)	3200 RPM
Sound power level	100 dB
Miter setting (left)	60 °
Sound pressure level	91 dB
Bevel setting (right)	48 °
Sound level uncertainty	3 dB
Vibration level uncertainty	1.5 m/s²
Bevel cut capacity (0° x 45°)	54 x 363 mm
Blade bore	30 mm
Blade diameter	305 mm
Saw blade included	Yes
Package type	Box
Product type	Sliding compound-miter saw
Cutting capacity 0°	382 mm
Bevel type	Single bevel

Weight and Dimensions

Depth	898 mm
Width	644 mm
Height	725 mm
Weight	29500 g