10 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: SP001G
Blade diameter 165 mm
Max. Cutting depth at 0° 56 mm
at 45° bevel 40 mm
at 48° bevel 38 mm
No load speed 2,500 - 4,900 min
-1
Overall length (with BL4040) 375 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 4.4 - 5.0 kg
without notice.
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
BL4020/BL4025*/BL4040*/BL4050F*
Charger DC40RA / DC40RB / DC40RC
residence.
WARNING: Only use the battery cartridges and chargers listed above.
Intended use
cuts. The tool is also intended for rip and cross cuts in
wood. If the tool is equipped with proper circular saw
blade, the tool can be used for sawing aluminum, plas-
tic, mineral contained plastic, and similar materials.
Noise
-
ing to EN62841-2-5:
Sound pressure level (L
pA
) : 89 dB(A)
Sound power level (L
WA
) : 100 dB (A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
another.
NOTE: The declared noise emission value(s)
exposure.
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-5:
Work mode: cutting wood
Vibration emission (a
h,W
) : 2.5 m/s
2
or less
2
Work mode: cutting metal
Vibration emission (a
h,M
) : 2.5 m/s
2
or less
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
NOTE:
To Next Page
Loading...
Need help?
General
