Makita UH422D User Manual

9 ENGLISH
Indication lamp
1
►1. Indication lamp
Running the tool allows the indication lamp to show the battery cartridge capacity status.
When the tool is also overloaded and has stopped during operation, the lamp lights up in red.
Refer to the following table for the status and action to be taken for the indication lamp.
Note 1:
The time at which the indication lamp lights up varies by the temperature
around the work area and the battery cartridge conditions.
Indication lamp
The lamp blinks in red.
The lamp lights up in red.
(Note 1)
The lamp lights up in red.
(Note 1)
Status
This indicates the appropriate
time to replace the battery
cartridge when the battery
power becomes low.
This function works when the
battery power is almost used
up. At this time, tool stops
immediately.
Autostop due to overload.
Action to be taken
Recharge the battery cartridge
as soon as possible.
Recharge the battery cartridge.
Turn off the tool.
OPERATION
CAUTION:
• Be careful not to accidentally contact a metal
fenceorotherhardobjectswhiletrimming.The
bladewillbreakandmaycauseseriousinjury.
• Overreaching with a hedge trimmer, particularly
from a ladder, is extremely dangerous. Do not
workfromanythingwobblyorinrm.
NOTICE: Do not attempt to cut branches thicker
than 10 mm in diameter with the tool. Cut branches
to 10 cm lower than the cutting height using branch
cutters before using the tool.
(1)
(2)
►(1) Cutting height (2) 10 cm
CAUTION:
• Donotcuto󰀨deadtreesorsimilarhardobjects.
Failure to do so may damage the tool.

Makita UH422D Specifications

General

Brand	Makita
Model	UH422D
Category	Trimmer
Language	English