EasyManuals Logo
Home>Manitou>Boat>X-Plode

Manitou X-Plode User Manual

Manitou X-Plode
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
© 2018 Manitou Pontoon Boats
23
< Ensure that all people, trailers, and other impediments are out of the
way before you begin backing up.
< Once the boat is in the water, lower the engine into the water, and
start it according to its owner’s manual.
< Remove the safety cable and drive the boat off the trailer.
< Once the boat is in the water, cut the engine, tie off the boat, and
remove your trailer from the launch ramp immediately. This allows
others to launch their boats.
Note: If it is difficult to move the boat off of its trailer, it may be
necessary to back into deeper water.
CAUTION
The launching information and instructions
provided in this manual are intended to provide
general guidelines only. Refer to your NMMA
manual and trailer owner’s manual for additional
information.
Boat Capacity Information
It is important to know the capacity of your boat so that you do not allow
it to become overloaded. An informational plate showing the capacity of
your Manitou is located on the captain’s stand. This plate shows
maximum weight, person, and horsepower capacities.
Note: The weight rating for your boat includes the engine, people,
and all of your gear.
The engine horsepower should never exceed the posted rating. Exceeding
this rating may cause damage to your boat and will void your warranty.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou X-Plode and is the answer not in the manual?

Manitou X-Plode Specifications

General IconGeneral
BrandManitou
ModelX-Plode
CategoryBoat
LanguageEnglish

Related product manuals