Electrical Equipment
In this section, you will learn more about your Manitou’s onboard
electrical systems, including instruments, controls, wiring, and other
components.
Please note that some items described in this section may not be present
on your Manitou model. This section provides a general overview of
onboard equipment. For more detailed information, check with your
Manitou dealer.
Electrical Wiring System
All systems on your boat are powered by a 12-volt DC
negative ground electrical system. This system has
been fully inspected at the Manitou factory. It is
recommended that any work involving adding
electrical equipment to your boat be completed by
your Manitou dealer. Incorrect wiring of electrical
circuits can result in fire and damage to your boat’s
electrical system.
All Manitou models, with the exception of the Aurora,
Aurora LE and Aurora Angler LE models, have a fuse
block, as pictured.
Batteries
The batteries on your boat were installed by your Manitou dealer. Inspect
the batteries frequently for cleanliness and tight connections. Confirm
that they are tied down securely. The battery compartment should be
well ventilated at all times. Please refer to your battery owner’s manual
for further instructions.
To Next Page
Loading...
Need help?
General
