Specifications
Model 14000
5
Gantry includes gantry raising cylinders capable
of lifting the entire upperworks counterweight for
removal and installation. Back hitch telescopes from
storage to working position and is locked with power-
actuated pins. Counterweight is suspended from
gantry with straps.
Spring cushioned boom stop and automatic boom
stop standard.
Counterweight
QTY. ITEM UNIT WEIGHT TOTAL WEIGHT
kg lb kg lb
1
Upperworks
Tray
9 965 22,092 9 965 22,092
6 Upper Side Box
7 938 17,500 47 628 105,000
Series 1 Total 57 593 127,092
1
Upperworks
Center Box
2 680 5,908 2 680 5,908
2 Upper Side Box
7 938 17,500 15 876 35,000
2
Carbody
Lower Box
12 020 26,500 24 040 53,000
Optional: Add to Series 1 for Series 2 Total 100 189 221,000
Series 1 and Series 2 counterweight configurations.
Includes connecting pins, brackets, and stops.
Swing System
High strength fabricated steel alloy rotating bed is
mounted on 2,76 m (108-9/16") diameter turntable
single-row ball bearing.
Independent swing powered by a fixed displacement
hydraulic motor coupled to a planetary gearbox with
internal brake.
Swing system maximum speed: 2.3 rpm.
Operator’s Cab
Fully enclosed and insulated steel module is
equipped with sliding door, large safety glass
windows on all sides and roof. Signal horn, cab
space heater, front and roof windshield wipers, air
conditioning, dome light, sun visor and shade, fire
extinguisher and air circulating fan are standard.
Optional: Tilt cab.
Optional: Nylon protective window covers.
Lowerworks
Carbody
Connects rotating bed to crawler assemblies. High
strength fabricated steel assembly with FACT™
connection system for fast installation and removal of
crawler assemblies.
Crawlers
Crawler assemblies are 8,3 m (27' 2") long with 1,22
m (48") wide cast steel crawler pads. Each crawler
is identical and can be mounted on either side of the
carbody. Each crawler is powered independently
by a variable displacement hydraulic motor and
includes two hydraulically powered pin actuators
for fast installation and removal from carbody.
Carbody mounted drive motors are connected to
crawler final reduction via telescoping shafts. This
permits crawlers to be removed without opening their
hydraulic circuits. Crawlers provide ample tractive
effort that allows counter rotation with full rated load.
Maximum ground speed of 1,8 kph (1.1 mph).
Optional: Self-Erect system includes: carbody
jacking cylinders with pads, controls, 27,2 mton
(30 ton) assembly block, boom-butt installation
support, gantry cylinders and crawler handling
chain.
Attachments
No. 76 Heavy-Lift Main Boom
The liftcrane is equipped with a 20 m (65.6') No. 76
basic heavy-lift tubular chord boom consisting of a
5,5 m (18') butt, 5,5 m (18') insert, and 9 m (30') top
with seven 76,2 cm (30") diameter roller bearing
sheaves in 3 sheave packs. Includes rope guides,
boom hoist wire rope, and boom angle indicator. The
No. 76 boom utilizes steel suspension straps and
Manitowoc’s patented, exclusive FACT™ connection
system. The FACT™ connection system consists
of two hooks, two horizontal connection pins and
alignment pads for each boom connection location.
Powered boom hinge system including cylinder,
piping, operating controls and locking device
standard.
Luffing jib preparation included as standard.
To Next Page
Loading...
Need help?
General
